caelgo2t.gif (2717 bytes)     CAE-ST-70 STEREO POWER AMPLIFIER SPECIFICATIONS
 
AMPLIFIER (Complete) SPECIFICATIONS
Power Output 30 Watts / Channel RMS
THD 0.05 %
IM (SMPTE) 0.08 %
Power Bandwidth 25 Hz - 18 KHz
Input Sensitivity 1.8 Volts @ Rated Output
Input Impedance 470 K Ohms
Overall Negative Feedback 10 db
Slew Rate 10 V/ uS
Rise Time 7 uS
Hum & Noise 0.5 mV
PS Regulation 0.01 %
Power Requirements 110 - 120 VAC
Tube Compliment 4 X 6922, 4 X EL34
DRIVER STAGE AMPLIFIER SPECIFICATIONS (#PWB-3A)
Frequency Response 10 Hz - 90 KHz +/- 0.1db In Circuit
Separation > 95db to 20 KHz
THD 0.33 % (Open Loop) @ 1 KHz
IM 0.41 % (Open Loop) SMPTE
Voltage In (Max) 14 Volts (P-P)
Voltage Out (Max) 390 Volts (P-P)
Input Impedance 470 K Ohm Adjustable
Output Impedance 24 K Ohms
Tube Compliment 4 X 6922 Alt 4 X 6CG7
Board Dimensions PWB-3A (Driver Module) 5.5" X 3-3/8"
POWER / REGULATOR STAGE SPECIFICATIONS (# PWB-S7P)
Input Power Req 430-0-430 VAC @ 300 mA High Voltage
50 VAC @ 20 mA Output Stage Bias
5 VAC @ 30 mA Regulator Bias
Regulated Output 425 VDC @ 200mA Plate
425 VDC @ 25mA Screen Grid
-45 VDC @ 12mA Bias
Board Dimensions PWB-S7P (Power / Regulator Module) 9" X 5"

copyright Curcio Audio 1998